Products

Racket string knowledge

Foreword

When you have a suitable racket you need a suitable string. Before getting one we should acquire some basic knowledge about racket strings.

Let’s now learn about the different badminton racket string materials and specifications and how often the strings on your racket need to be changed. A detailed explanation follows! 
 
 

Material

In earlier time strings were made from catgut. Although they had good elasticity and good feel they were easily affected by damp and broke easily, weren’t easy to store and were also expensive to make.

Catgut strings are now very rare. Most strings in the market today are synthetic strings: nylon, polyester or manmade fiber.
 
Progress in string technology allows durable strings with good elasticity to be made for a low cost; the feel may not be as good as catgut but synthetic strings are much more economical, consequently, highly respected catgut strings have gradually disappeared from the market. 

 

Specification

1.Diameter

Current string diameter is 0.6mm~0.8mm;in terms of the same material, the thicker the string the more durable it will be but the poorer its elasticity will be;the thinner the string the greater the elasticity but the poorer the durability will be and the easier it will break. 

 

2. Length

Single use strings are usually 10 meters long (Picture 1). Racket shops need to use a large amount of string so will buy spools with 200 meters of string on them (Picture 2).

 
 

 

Picture 1 A single use string
 
 
 

Picture 2 A spool of string 

 

String maintenance

Strings should be kept in a dry, dark and cool place. When a racket has been strung it should be stored in a bag to protect it from damp and rain; it should also be protected from sweat.

Rackets and strings should also be kept away from high temperatures and strong sunlight, like inside a car on a sunny day, to avoid the string becoming misshapen or deteriorating.  

No weight should be placed on a strung racket as this will reduce string tension and can cause the racket to become distorted, shortening its use life. 

 

Changing the strings 

1.Broken strings 

When some of the strings in your racket break or fray seriously don’t carry on using it as the stress will be unevenly distributed and your racket will become misshapen The damaged strings should be immediately cut.  

 

2.Loss of poundage 

Both when a racket isn’t being and when it is used normally the phenomenon of loss of poundage / tension occurs; when a racket is used frequently the impact of the shuttlecock on the strings will reduce their elasticity and loss of poundage will be more obvious.

This means that the racket strings should be replaced after a period of use rather than waiting until thy are broken to replace them.  

 

3.Strings develop rough edges

Every time a shot is played, whether it is a smash, drop shot or lob, friction will be caused between the strings and between the strings and racket, marking the strings and producing rough edges (shown in Picture 3.)

Rough edges are produced by the tearing of the string fibers and this reduces string tension and poundage. When the sweet spot on a racket has serious rough edges the strings should be replaced.

Also, the area where there are rough edges can tell you if you are hitting the shuttlecock correctly. If the rough edges are near the frame or outside the sweet spot then you should adjust the hitting point.

 

Picture 3 Strings  develop ragged edges 

 

4. Poor feel
The poundage of a newly strung racket will be sufficient to give the player excellent control and strike feel; when control and strike feel deteriorate the strings should be replaced.  
 
 
( Edit by VICTOR Badminton )

RELATED POST|